Tuffy Center Console install w/ airbag problem
So i installed the full tuffy center console last night and when i went to drive me jeep today my airbag light is staying on. I do have the airbag on/off switch plate that i had to pop out during the install. the main wire is still connected but there is a wire taped to it that goes to nothing, could this be my problem or is it something else. here is a pic of the wire
Well if it goes to nothing I wouls say not but if it went to something and before and now doesn't then that would be your problem.LOL Sorry I had to!!! I would say turn the switch off and back on again and see if that does anything!!!!If that does not work reset the computer.
I removed that switch when I installed a mod some time ago
when I hooked it all back up my airbag light was on its been on ever since
turns out I need to replace the switch it just when out
|All times are GMT -5. The time now is 02:58 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.