Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   savvy johnny joint question (http://www.wranglerforum.com/f210/savvy-johnny-joint-question-203385.html)

Patrick H 12-04-2012 08:00 AM

savvy johnny joint question
 
One more question about these..:) What size are the jam nuts on the Savvy/Currie lower control arms? The wrench size, that is..Thanks!

Imped 12-04-2012 08:45 AM

The 1" shank Currie JJ's use a 1.5" jam nut I believe.

Patrick H 12-04-2012 08:55 AM

Thanks. All my bigger wrenches are in my box here at work. I'd like to take the right wrenches home to install these when they get here. I'm not particularly fond of using adjustable wrenches if I can help it.

Imped 12-04-2012 09:05 AM

If you've got two, that'll make it easier. Being LH/RH threads, you'll just need to crank on them simultaneously in the same direction. Opposing threads makes that very easy and is an advantage most don't think about.

Patrick H 12-04-2012 09:35 AM

Yep, already planned on two wrenches. I only have one set of large open end/ combination wrenches, so I'll have to use a 15" adjustable on one side.


All times are GMT -5. The time now is 03:09 AM.