Hey guys, I know there is always talk and controversy over the 4BT YJ engine swap, so I figured I would post my build up here.
The basics:
This was for my senior project to graduate with my BS in Mechanical Engineering Technology from Penn State.
I started with an 89 YJ I bought with no driveline, almost new interior, but ugly faded canary yellow paint.
I drove to Ohio and bought a 4BTA that was in a bread truck, It came with the alternator, power steering pump, turbo, aftercooler and some other junk.
I bought an NV 4500 5 spd, adapter, clutch, flywheel, master/slave, bellhousing, from a dodge ram 2500 that had a 12v cummins.
I got an adapter kit to mate the jeep NP 231 to the NV 4500
Got to work....
These are pics right after I loaded everything up from my house to take down to the school shop. I built this Jeep in the Penn State Harrisburg campus Engineering shop.
The basics:
This was for my senior project to graduate with my BS in Mechanical Engineering Technology from Penn State.
I started with an 89 YJ I bought with no driveline, almost new interior, but ugly faded canary yellow paint.
I drove to Ohio and bought a 4BTA that was in a bread truck, It came with the alternator, power steering pump, turbo, aftercooler and some other junk.
I bought an NV 4500 5 spd, adapter, clutch, flywheel, master/slave, bellhousing, from a dodge ram 2500 that had a 12v cummins.
I got an adapter kit to mate the jeep NP 231 to the NV 4500
Got to work....
These are pics right after I loaded everything up from my house to take down to the school shop. I built this Jeep in the Penn State Harrisburg campus Engineering shop.