Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   York OBA problem (

03rubi 08-02-2008 07:48 PM

York OBA problem
I had two York 210 compressors laying around so I decided to get a mounting kit from Kilby Ent. along with a coalescing filter, manifold, press. switch,and intake filter. I've read that the York comp. has a problem with putting a lot of oil into the system, so I did a little research and found that there is a passage behind the front seal that can be plugged with a set screw that greatly slows the discharge of oil into the system. I did this, but I still have a lot of oil. So much that it's blowing right past the coalescing filter. Anyone out there with a York system have any suggestions ?

Jerry Bransford 08-02-2008 08:21 PM

Is it positioned horizontally or vertically? My F210 is mounted in a vertical position and I get very little oil into my air lines. I'd probably call Brad Kilby at and get his opinion, he's the guru of this stuff.

03rubi 08-02-2008 09:46 PM

It's vertical. I sent Kilby an e-mail. Thanks for the reply.

All times are GMT -5. The time now is 11:56 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.