Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   33enineering +1.5" Tranny Mount (http://www.wranglerforum.com/f210/33enineering-1-5-tranny-mount-20410.html)

nicolas-eric 08-03-2008 11:01 PM

33enineering +1.5" Tranny Mount
 
Hello.

Today i found the 33engineering +1.5" auto tranny mount:
click me

http://www.offroadtoystore.com/Merch...33-1650_sm.jpg

Is it right that i can install a 1.5" higher TC plate with this tranny mount without needing a SYE and CV driveshaft?
Or can I install 1.5" more lift with this mount and my stock tranny?

With this mount and my 2" BL I sould be able to install a real flat TC plate. Right? Like this:

http://up.picr.de/935513.jpg

Thanks in advance.
nicolas-eric :wavey:

nicolas-eric 08-03-2008 11:33 PM

It seems like the +1.5" tranny mount wouldn´t make sense.

Here´s a pic of a Teraflex belly-up skid with the stock tranny mounts on a buddies Jeep.
There is only about 1/2-3/4" between the skid an the tranny oil pan.
With the 33engineering tranny mount the oil pan would be too low IMO.

Do you have pics of the 33engineering skid with the +1.5" tranny mount on a TJ with the 42RLE 4-speed auto tranny? Does it fit?

http://www.kantoweb.de/misc/Belly7.jpg


All times are GMT -5. The time now is 12:03 AM.