Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   CJ General Discussion Forum (http://www.wranglerforum.com/f298/)
-   -   Ball joints (http://www.wranglerforum.com/f298/ball-joints-204989.html)

Peanut1560 12-12-2012 08:30 AM

Ball joints
 
Replaced ball joints and after alignment at about 45mph. Its all over the road... Help

C.L. 12-12-2012 08:53 AM

Sounds like it may be "toed out". Who did the alignment, and do you have a toe in measurement?

Peanut1560 12-12-2012 09:05 AM

Quote:

Originally Posted by C.L. (Post 3095326)
Sounds like it may be "toed out". Who did the alignment, and do you have a toe in measurement?

This is a friend of mines jeep. He carried it to an offroad shop for alignment. I can do a check with a tape measure but havnt had the time yet. Was thinking it may br that but wanted other in put. I put a lift kit on my TJ and toed it in myself with no trouble. Probly just doe the same to his

lynn 12-12-2012 09:40 AM

Check toe, check caster, and check for play in the intermediate steering shaft upper and lower joint
Got the wheel bearings properly seated and torqued?

Peanut1560 12-12-2012 10:08 AM

Quote:

Originally Posted by lynn (Post 3095461)
Check toe, check caster, and check for play in the intermediate steering shaft upper and lower joint
Got the wheel bearings properly seated and torqued?

Bearings are good. Going to check the afore mentioned this afternoon


All times are GMT -5. The time now is 05:21 PM.