Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Does anyone make a 1.25" Body Lift that are full replacements? (http://www.wranglerforum.com/f282/does-anyone-make-a-1-25-body-lift-that-are-full-replacements-205866.html)

Ehryk 12-17-2012 01:57 AM

Does anyone make a 1.25" Body Lift that are full replacements?
 
So far I can find 1.25" body lifts with pucks, and 1" body lifts with pucks OR full mount replacements.

I'd really like a 1.25" body lift on my 2003 Rubicon, but I'd much prefer replacement mounts as mine are ~10 years old now.

Does anyone make these? Or would I have to get new stock mounts + 1.25" pucks separately to accomplish this?

Thomas302 12-17-2012 07:20 AM

I have the day star full mounts. If you want to replace your mounts in recommend these. You won't even notice a 1/4"

Imped 12-17-2012 08:29 AM

I run Daystar mounts....they're 1" taller. I recommend them.

Ehryk 12-17-2012 09:50 AM

Quote:

Originally Posted by Moabrubi (Post 3082573)

The Rubicon transfer case is fatter. If you plan on doing a real tuck (1" deep skid or less) then you need all the wiggle room you can get. Even with 1.25" a bit of tub clearancing is required sometimes.

If you're not doing a tuck, then 1" will suit you just fine.

I plan on doing a tummy tuck and I've heard that little extra clearance helps. In any case, I have found 1" replacements, but not 1.25". Do they exist?

Cons_Table 12-17-2012 10:02 AM

JKS sells a 1.25" BL. That is what I am running. I dont think it is a FULL replacement, but a replacement for the upper "mount."

Jeembro 12-17-2012 10:06 AM

Quote:

Originally Posted by Cons_Table
JKS sells a 1.25" BL. That is what I am running. I dont think it is a FULL replacement, but a replacement for the upper "mount."

No it's not even a replacement for the upper mount. Their body puck is placed on top of the stock upper mount.

Cons_Table 12-17-2012 10:08 AM

Quote:

Originally Posted by Jeembro (Post 3113306)
No it's not even a replacement for the upper mount. Their body puck is placed on top of the stock upper mount.

Yup...you're right :doh:. I remember that now. It has been a while since Ive installed it.

Ehryk 12-17-2012 10:20 AM

So if not, are there 0.25" pucks I can add to the 1" mounts? Would I need longer bolts?


All times are GMT -5. The time now is 09:19 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.