Help, It's cold out!!!
My heat stopped working in my jeep I took it apart and found the previous owner re wired everything:banghead: and the control switch has a bible on it and the prongs are loose did it melt? And on the other side where the mode selector switch is the three wires are secrete instead of a harness like it suppose to be. The wires are blue green and black with connectors over them to connect to the three prongs. Do I buy a whole new heater control unit or just a switch and the mode select harness? And I've tried to find the harness and have had no luck. Anyone know where to get one or know what I should do? Also it's a 2000 so it's the three dial model.thanks in advance
Here are a few part #s I have saved. Some are a bit dated but still good I hope.
3 wire pigtail for mode switch part # 68080536AA
5 wire speed switch pigtail part from dealer. 68052589AA
Speed switchpart # 05011214AA
Complete panel harness part # 05183287AA W/a/c
This may also help
2000 Jeep Wrangler TJ 3 Wire Blower Harness - Jeep Wrangler Forum
|All times are GMT -5. The time now is 09:00 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.