Jeep Wrangler Forum

Jeep Wrangler Forum (
-   General Jeep Discussion (
-   -   Stretch plates? (

HkdOnJP 08-21-2008 11:25 PM

Stretch plates?
I have a 94 yj with the 35 if i bought these Stretch plates that move the axle back either 3/8" or 1" back would i have to move anything or would it be as simple as putting them on i have the stock drive shaft.


Here's a link

AzTJ 08-22-2008 05:25 PM

If you want to stretch the wheelbase, look into reversed XJ, springs. And there is a lot more to it and just moving the axle... new drivshaft, gas tank relocation.

whitebuffalo 08-22-2008 05:35 PM

just moving it an inch shouldnt be a problem. i cant say for sure on the rear, but on my front when i went soa the perch allowed me to stretch it an inch with no other mods, no prob.

HkdOnJP 08-22-2008 11:21 PM

there only 16.50 i guess i could put em on and if it doesnt work just take them off

jpdocdave 08-23-2008 06:05 PM

how does that plate move the axle up?

HkdOnJP 08-23-2008 10:25 PM

its got two holes one that is 3/8 off and one that is 1 " off so depending on which hole you put your center pin through is how your axle moves

All times are GMT -5. The time now is 04:36 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.