Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   What in the world is this??? (http://www.wranglerforum.com/f210/what-in-the-world-is-this-210517.html)

DadeCountyJeeper 01-08-2013 05:50 PM

What in the world is this???
 
2 Attachment(s)
Hey guys,

I just removed the center console from my TJ for a deep cleaning on the carpet and found this "device" tucked underneath the center console away from anyone's view. I realized it flickers when I turn my TJ on and then turns off once the car idles. Not sure what it is intended to indicate or why it is hidden underneath the center console.
My 4x4 low and high are perfect, car idles perfect, no knocking, wipers work perfect, lights, basically it is not tied to anything I can think of.
Thank you for any guidance on this matter.

paddian 01-08-2013 05:57 PM

Is that the switch to turn off the passenger airbag.

jjone54 01-08-2013 06:00 PM

That is the passenger airbag switch on and off

Horn5413 01-08-2013 06:02 PM

Quote:

Originally Posted by paddian (Post 3200902)
Is that the switch to turn off the passenger airbag.

X2. Does you key fit in that slot?

G-LOVE 01-08-2013 06:16 PM

Quote:

Originally Posted by Horn5413 (Post 3200935)
X2. Does you key fit in that slot?

That's what she said!!!:rofl: Just re-attach it when you put your console back in.

Enemy 01-08-2013 06:50 PM

If your console doesnt have the passenger airbag portion it may be that someone swapped a different console in. If not it will bolt right back up.

DadeCountyJeeper 01-08-2013 07:39 PM

Quote:

Originally Posted by Enemy
If your console doesnt have the passenger airbag portion it may be that someone swapped a different console in. If not it will bolt right back up.

Haha that was good from g-love and you are absolutely right. I neglected to mention that I have an aftermarket center console and I don't have an airbag mounting option. At least I don't think so. Airbag indicator duh! I will post pics of the center console because there is an opening that I now covered and that may be where the switch is intended to be mounted. Thanks fellas.


All times are GMT -5. The time now is 06:56 PM.