Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Classifieds Archive (http://www.wranglerforum.com/f135/)
-   -   PA: 07 to 13 JK WARRIOR PRODUCTS 2 DR CORNER GUARDS (http://www.wranglerforum.com/f135/07-to-13-jk-warrior-products-2-dr-corner-guards-212151.html)

dvdsjk 01-15-2013 02:06 PM

07 to 13 JK WARRIOR PRODUCTS 2 DR CORNER GUARDS
 
Bought these but im going full corners I think. 12 guage steel. I just powder coated them. They do not make a textured corner only smooth so I went texture finish to match my sliders. And brand new LED kit to fit the guards. Have around 275 bucks in them. $230.00 plus shipping
http://i494.photobucket.com/albums/r...-08-52_730.jpg

http://i494.photobucket.com/albums/r...-09-07_493.jpg
http://i494.photobucket.com/albums/r...-09-28_634.jpg
http://i494.photobucket.com/albums/r...-10-11_689.jpg

The Collin 01-15-2013 07:25 PM

Do these require only drilling/rivets or cutting at all?

dvdsjk 01-15-2013 07:52 PM

Quote:

Originally Posted by The Collin (Post 3233426)
Do these require only drilling/rivets or cutting at all?

Rivets to hold it in place but the light holes must be drilled also. I purchased hole saws the same size as the holes and was going to rivet the corners on first then use the holes as a jig to hold the saw in place.

dvdsjk 01-17-2013 05:17 PM

Bump!!!

dvdsjk 01-24-2013 08:59 PM

last bump!


All times are GMT -5. The time now is 06:26 AM.