Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   P0300 code (http://www.wranglerforum.com/f210/p0300-code-212417.html)

Saxman7131 01-16-2013 05:02 PM

P0300 code
 
Check engine light is back on so I went back to AutoZone. P0300 multiple misfire.
Any advice on what to check first?

Saxman7131 01-16-2013 05:10 PM

1 Attachment(s)
This is another thing it does.

Airbag light comes on and the speedo and tach goes dead, other gushes work though.


Attachment 198619

Lookin2buy 01-17-2013 10:08 AM

I had a cylinder misfire on my #3. I replaced all plugs...and I noticed the gap on #3 was about twice what it should be...

Saxman7131 01-17-2013 10:28 AM

Quote:

Originally Posted by Lookin2buy
I had a cylinder misfire on my #3. I replaced all plugs...and I noticed the gap on #3 was about twice what it should be...

Good place to start. I replaced the plugs and wires, cap and rotor about a month ago. I gapped to 032, I had lots of trouble with the #1 plug. Ill pull them all inspect them and check the gap.


All times are GMT -5. The time now is 09:50 PM.