Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Crown Victoria springs (

fr0st m0nkey 09-08-2008 02:20 AM

Crown Victoria springs
Does anybody know if I can use crown victoria springs up front, or if I have to use the v8 ZJ springs up there for the ZJ/CV coil lift?

distortedtj 09-08-2008 03:05 AM

the crown vic springs are for the rear not the front

fr0st m0nkey 09-08-2008 11:36 AM

So that's a no go to the CV's up front? It has to be ZJ coils? I only ask because I can get the CV's for free through the sheriffs office, haha.

distortedtj 09-08-2008 03:41 PM

The front and rear springs are a different height in your tj. Adding the CV springs to the front mite actually lower your front end. You can usauly pick up some ZJ springs from the junk yard for less than 40 bones.

timritchieblue 09-08-2008 07:09 PM

you need this : Jeep 3 Inch Budget Lift Installation

jeepjeep 09-08-2008 09:08 PM

I have zj v8 springs w/ 1.25 bb in front , then put front springs in rear all in all net. 3.5 inch lift rear and 3.0 inch in front... dont know if this photo link will work but my truck is the red on 34"s the other one is 4 inch on 36" - TARABLY TARAFYING Corbett Run 9-7-08 - Photo 46 of 157

All times are GMT -5. The time now is 08:30 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.