Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Classifieds Archive (http://www.wranglerforum.com/f135/)
-   -   WANTED: Mopar plastic push pins (http://www.wranglerforum.com/f135/wanted-mopar-plastic-push-pins-212912.html)

Nashorn101 01-17-2013 09:59 AM

WANTED: Mopar plastic push pins
 
1 Attachment(s)
Hello. I need Mopar's Black Plastic push pins for their bumper end caps on the stock TJ bumper.

I need 16 total if you have them?

Thank you!

Here is what they look like:

sandfox4 01-17-2013 08:20 PM

i have never saw those on a tj bumper, always just 6mm torx screws, anyway take your end cap to an autoparts store ,they can see what size you need and will have them

robert0069 01-17-2013 08:52 PM

dido

cmaggi2 01-17-2013 09:41 PM

Check this site too.
http://www.clipsandfasteners.com/Sea...=10&Search.y=9
The link itself is for jk screws.

Nashorn101 01-18-2013 12:50 AM

1 Attachment(s)
Quote:

Originally Posted by sandfox4 (Post 3242209)
i have never saw those on a tj bumper, always just 6mm torx screws, anyway take your end cap to an autoparts store ,they can see what size you need and will have them

No, I have the torx screws. I just need those Push Pins for the flush Mopar end caps - not for the "Milk Jugs".

The caps look like this:

allblackedout 01-18-2013 12:52 AM

Oh man I need those for my JK too!! Let me know where you find them, I was going to try the dealer.

Nashorn101 01-18-2013 12:53 AM

Quote:

Originally Posted by allblackedout
Oh man I need those for my JK too!! Let me know where you find them, I was going to try the dealer.

Well I've found them on eBay. I just wanted to see if anyone in the forum had them to sell before I bough brand new!

sandfox4 01-18-2013 10:14 AM

you can take the u shaped clip nuts off of your milk jugs and reuse what you have, those holes are to big to fit a christmas tree style fastener into

blueghost 01-18-2013 09:57 PM

Try harbor freight I picked up some there.

blueghost 01-18-2013 09:58 PM

And they were a lot cheaper than mopar

Redrammer99 01-19-2013 12:43 AM

I just put those end caps on and picked up the pins at Napa. I bought two bags with eight or so pins in each bag for less than $10.

kwcgolf 01-26-2013 02:36 AM

take one of the new endcaps to lowe's > hardware dept. > "specialty fasteners" or automotive section of the hardware dept. > find the ones that fit the end caps.

I'm looking for a spare tire cover for a 31x10.5.


All times are GMT -5. The time now is 04:40 PM.