Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Quick rocker guards install question.. (http://www.wranglerforum.com/f210/quick-rocker-guards-install-question-213366.html)

TalkIsJeep 01-19-2013 10:24 AM

Quick rocker guards install question..
 
I'm in the middle of installing some Smittybilt XRC Rocker Guards and the directions call for me to shave 3/16" off of the top of each bushing. I also have a lift kit.. So above the bushings are the lift blocks. The bushings are domed at the top, I feel like shaving them flat would screw something up, would I just be able to cut down the blocks instead? It's only 2 per side, but the 3/16" will be filled in by the rocker guards themselves. Just seems like it's more accurate cutting down something that is already flat.

TalkIsJeep 01-19-2013 10:26 AM

1 Attachment(s)
These are what they're telling me to shave down 3/16"..see the curve to them?

Attachment 199422

TalkIsJeep 01-19-2013 10:42 AM

Sorry, too cold outside, brain was going dead. Apparently I have to shave the bushings.


All times are GMT -5. The time now is 03:12 AM.