Jeep Wrangler Forum banner

Help Please, Will this fit?

925 views 5 replies 3 participants last post by  tjvineyard 
#1 ·
I have a 2000 Jeep wrangler that I recently purchased and it only came with a short block. I have found a complete top end from a 1999 Jeep Grand Cherokee

Intake,throttle body,injectors,cylinder head etc and I am wanting to know if this is a direct replacement for my 2000 TJ? Will everything plug up to my wiring harness?

It says in the ad that it is compatible with my jeep but Id like to hear it from some of you guys who seem to really know their stuff..

Thanks!
 
#2 ·
Can you get the part number for a 1999 Grand Cherokee engine wiring harness from this forum's Grand Cherokee section or your local Jeep dealer tomorrow & post it here? I can cross-reference it to the 2000 Wrangler's harness part number to see if it's the same. I would be suprised if it is 100% plug & play but that isn't to say it couldn't necessarily be made to work since it is likely very close.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top