Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Knocking noise after a little rough road action (http://www.wranglerforum.com/f218/knocking-noise-after-a-little-rough-road-action-21584.html)

87YJWrangler 09-17-2008 08:57 PM

Knocking noise after a little rough road action
 
:confused:Okay it was after doing about 10mph over a set of potholes that shook the hell out of me and my YJ it starting knockin it sounds like its either comin from the transfer case or piston 1 or 6 its still knockin I need help. If anyone has had this issue before advise would be helpful

raymond hall 09-17-2008 09:11 PM

could be almost anything. i went over a set of rr tracks and mine started to have a death rattle. ended up being timeing chain. the one in it was only about 3 months old. mine is 6 cyl '87

hope this helps

87YJWrangler 09-18-2008 01:54 AM

Quote:

Originally Posted by raymond hall (Post 265124)
could be almost anything. i went over a set of rr tracks and mine started to have a death rattle. ended up being timeing chain. the one in it was only about 3 months old. mine is 6 cyl '87

hope this helps

I got the in line 6 87 also so I'll check that first thanks
:punk:

87YJWrangler 11-19-2008 07:40 PM

Fixed it
 
Fixed the issue I dented my oil pan under the first piston and it was knocking on the piston bearing:firedevil:

payj90 11-20-2008 05:53 PM

been there, you should consider some better bump stops

87YJWrangler 11-22-2008 04:53 AM

:punk:Had and looks as tho they have rusted away I figure when I get my lift kit ill put new ones on along with a new pan and skid plates all along the important parts i.e. Oil pan, pumpkins along with lockers, fuel tank, and transfer :punk:

payj90 11-22-2008 05:11 PM

mine had rusted pretty bad too so i just took them off and thought nothing of it, and it was fine for a year then i had the axle hit the oil pan, so i took the pan off beat it back out put it back on and was only going to being driving on road until i put some bumpstops on. then drove into a feild party and did it again. i guess the moral of my story is it will probley happen again.

87YJWrangler 11-23-2008 01:31 AM

Yeah I know I gotta get some on there again just I gotta make them and I dont have a welder or the rubber stops. Think I can buy em? and just bolt them on?:confused:


All times are GMT -5. The time now is 06:50 PM.