Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Off-Topic (http://www.wranglerforum.com/f6/)
-   -   WranglerForum banner pic at the top of the page (http://www.wranglerforum.com/f6/wranglerforum-banner-pic-at-the-top-of-the-page-216047.html)

Brew 01-31-2013 12:30 AM

WranglerForum banner pic at the top of the page
 
Anyone know where the pic came from (the one at the top of every page w/ all the Jeeps lined up)? I really like the light blue TJ (4th from left) and I'd like to see a few more pics of it.

Anyone know who's it is or where I could find some more pics of it?

schnutzy 01-31-2013 08:16 AM

That jeep belongs to Cons Table, he is one of theo other mods here on the forum.

Cons_Table 01-31-2013 09:25 AM

Hey thats me ;)

Here are a few pics...
http://www.wranglerforum.com/images/...4443/38491.jpg
http://www.wranglerforum.com/images/...4443/38493.jpg
http://www.wranglerforum.com/images/...4443/38497.jpg
http://www.wranglerforum.com/images/...4443/38492.jpg

Brew 01-31-2013 10:39 AM

Thanks for the pics, nice looking TJ Cons! I really like how the front of your rig looks with the MCE Fenders and where you relocated the signal lights. How do you like the MCE Fenders? Do you have enough clearance with 3.75" lift and 35's up front?

Cons_Table 01-31-2013 11:18 AM

Quote:

Originally Posted by Brew (Post 3303388)
Thanks for the pics, nice looking TJ Cons! I really like how the front of your rig looks with the MCE Fenders and where you relocated the signal lights. How do you like the MCE Fenders? Do you have enough clearance with 3.75" lift and 35's up front?

Thanks Brew. For the 2ish years Ive had the fenders, I cant complain. They have held up well. Since they were the very first model to come out, they didnt have a UV resistant in the material so they faded in a year or less...but nothing a little spray paint didnt fix. With the mediocre flex I have, there is enough clearance. If I get really flexed out the tires will rub a little up front, but the fenders just bend out of the way.

Brew 01-31-2013 04:38 PM

Quote:

Originally Posted by Cons_Table (Post 3303522)
Thanks Brew. For the 2ish years Ive had the fenders, I cant complain. They have held up well. Since they were the very first model to come out, they didnt have a UV resistant in the material so they faded in a year or less...but nothing a little spray paint didnt fix. With the mediocre flex I have, there is enough clearance. If I get really flexed out the tires will rub a little up front, but the fenders just bend out of the way.

Are they super flimsy like rubber or are they more of a hard plastic like the stock fenders?

Also, where did you get the front turn signal lights? They look very clean.

Thanks for answering my questions.

Cons_Table 01-31-2013 04:47 PM

Quote:

Originally Posted by Brew (Post 3304692)
Are they super flimsy like rubber or are they more of a hard plastic like the stock fenders?

Also, where did you get the front turn signal lights? They look very clean.

Thanks for answering my questions.

They are made of ABS I believe...so they are fairly rigid. However they are not rigid enough that they crack or anything when bent. I would say they are actually a little stiffer than the stock flares.

The front turn signals are just some cheapos from NAPA with the rubber grommet. I was originally going to use the turn signals out of the front of a JK. I got that idea from Jerry Bransford. If you do a search you should be able to find his thread from when he installed MCE's on his old rig. Other than cutting a hole for the turn signal, the JK signals are plug and play. Unfortunately when I went to buy them, they were out of stock everywhere I looked. I have still contemplated buying a set and redoing the lights, but these are working for now :thumb:

Brew 01-31-2013 05:15 PM

Found it, thanks for the tip!:thumb:

http://www.wranglerforum.com/f5/new-...ler-43596.html

Cons_Table 01-31-2013 05:23 PM

Quote:

Originally Posted by Brew (Post 3304813)
Found it, thanks for the tip!:thumb:

http://www.wranglerforum.com/f5/new-...ler-43596.html

Thats it! Pretty good write up of whats involved for installing a set of the fenders.


All times are GMT -5. The time now is 08:27 AM.