Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Off Road and External Lighting (http://www.wranglerforum.com/f132/)
-   -   rock lights? (http://www.wranglerforum.com/f132/rock-lights-216784.html)

mhanksii 02-03-2013 03:44 PM

rock lights?
 
Found these today Wurton Pod Rock Light 20031 - Onboard-air.com and thought that they would be awesome if they were wired to the come on when the doors were opened like courtesy lights just under cab, say dead center and stretched as far front to rear as possible? :punk:

Any thoughts, have I been drinking to much?

Tanks 02-11-2013 07:46 PM

I just ordered 2 pairs. I'll post up some pics of mine once I do the install for you if you'd like?

Tjdude08 02-11-2013 08:09 PM

A bunch of rock crawlers in my home town went to where I work and bought all kinds of big rig marker lights with rubber grommets and put then underneath their tubs.

Worked awesome and very very cheap

brains 02-12-2013 12:13 AM

i bought some really (really) cheap white 24-LED waterproof strips online and stuck them on the side of the frame rails on my TJ, it was about $25 total between the lights and switch, and they put out a ton of light in the perfect place. it was great on the trail at night with doors off. the guy who bought it is always telling me how cool they are, and i'm really leaning towards picking up another set for the rubi.

Reffett 02-13-2013 02:52 PM

Quote:

Originally Posted by brains (Post 3356193)
i bought some really (really) cheap white 24-LED waterproof strips online and stuck them on the side of the frame rails on my TJ, it was about $25 total between the lights and switch, and they put out a ton of light in the perfect place. it was great on the trail at night with doors off. the guy who bought it is always telling me how cool they are, and i'm really leaning towards picking up another set for the rubi.

Any pics of your old jeep with these on? Thinking about adding some cheap LEDS under my Tj

Tanks 03-15-2013 12:27 PM

So I finally got around to installing my lights this week. Here are the pics from my install of my Wurton Pod lights. They are very bright. I may have needed one more set at the back near the bumper but for driving they are more than enough light. I'm really happy with them.

Built brackets and opted to mount them in the front wheel wells and directly under the doors by sandwhiching them between existing plates for my sidesteps and front fender support so I didn't have to drill a bunch of holes in the Jeep.



http://i1288.photobucket.com/albums/...g?t=1363367623

http://i1288.photobucket.com/albums/...g?t=1363367635

http://i1288.photobucket.com/albums/...g?t=1363367638

http://i1288.photobucket.com/albums/...g?t=1363367651

http://i1288.photobucket.com/albums/...g?t=1363367664

http://i1288.photobucket.com/albums/...g?t=1363367672

http://i1288.photobucket.com/albums/...g?t=1363367681

http://i1288.photobucket.com/albums/...g?t=1363367685

http://i1288.photobucket.com/albums/...g?t=1363367694

http://i1288.photobucket.com/albums/...g?t=1363367699

http://i1288.photobucket.com/albums/...pscc1b08f1.jpg

Tusk 03-15-2013 01:12 PM

Nice. Beats the heck out of my zip tie install.

Tanks 03-15-2013 01:53 PM

Quote:

Originally Posted by Tusk (Post 3507545)
Nice. Beats the heck out of my zip tie install.

Thanks! Yeah, but I bet your's went a lot smoother...

Gaby Chaghouri 03-18-2013 10:40 PM

I just got these from eBay and they produce a ton of light. Small and compact. I'm installing tomorrow and I'll post how they work. Complete kit.

All include Super Bright Jeep Rock Crawl 60 LED Light | eBay

HSKR4X4 03-19-2013 12:50 AM

I did the platinum burners from Walmart. Cost $40 total. Very easy to install.. Once installed you can adjust by hand to angle to your preference. When I'm not using, I have angled flat with frame area so you cant see them at all

Here is a few pics right after install

(Platinum burners come in a bunch of different looks. I got the mini rectangle looking ones)

http://i1238.photobucket.com/albums/...psabb5b454.jpg

http://i1238.photobucket.com/albums/...ps582aeebc.jpg
http://i1238.photobucket.com/albums/...ps0c8ddb74.jpg

Mowgli25 03-19-2013 02:41 PM

Quote:

Originally Posted by HSKR4X4 (Post 3522128)
I did the platinum burners from Walmart. Cost $40 total. Very easy to install.. Once installed you can adjust by hand to angle to your preference. When I'm not using, I have angled flat with frame area so you cant see them at all

Here is a few pics right after install

(Platinum burners come in a bunch of different looks. I got the mini rectangle looking ones)

Did you use the wiring harness that came with them


All times are GMT -5. The time now is 05:39 PM.