Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Tube Fenders and Blinkers? (http://www.wranglerforum.com/f282/tube-fenders-and-blinkers-219601.html)

hummer-rescue-squad 02-15-2013 10:55 AM

Tube Fenders and Blinkers?
 
Iam planning in getting tube fenders here shortly. I was wondering if i would have to relocate my blinker that is located on the stock fender.

TJDave 02-15-2013 12:20 PM

Yes. You will have to do something with it. From a write-up Jerry B. posted about MCE fenders years ago, I also chose to use JK turn signal housings mounted in the front grill. They are only $12 each and the stock light hardware plugs right into them. My friend has his stock turn signals mounted under his tube fenders.

http://i273.photobucket.com/albums/j...9-25112440.jpg

http://i273.photobucket.com/albums/j...ps2c007a17.jpg

Those are just a couple suggestions. There are many more options out there.

Quad411 02-15-2013 03:02 PM

When I bought the Smitty built ones for my YJ, they came with an optional box that you could mount under the fender for the blinker. I dont know if they still do or not though, that was 5 years ago.

Kota7x 02-15-2013 03:26 PM

Quote:

Originally Posted by hummer-rescue-squad
Iam planning in getting tube fenders here shortly. I was wondering if i would have to relocate my blinker that is located on the stock fender.

I did what Jerry Bransford did and got some JK turn signal lights for the grill and I also got some small LED lights for the fender.
http://i1092.photobucket.com/albums/...8e2cb6445d.jpg

JREDmoto11 06-12-2013 08:04 PM

How do you wire in the LEDs? Mine only work when lights are off

TJDave 06-12-2013 09:33 PM

Quote:

Originally Posted by JREDmoto11 (Post 3854749)
How do you wire in the LEDs? Mine only work when lights are off

If you are referring to the two wire led side marker lights, try swapping the two wires around.


All times are GMT -5. The time now is 11:41 PM.