painting primer question
I ordered my acrylic urethane single stage paint, my 2K urethane primer, and my urethane reducer. My question is, after priming the bare metal spots and also the areas where I applied bondo a couple of coats, can I cut the primer to use it as a sealer ? I plan on priming/sealing my whole jeep with about 3-4 coats. :confused: :confused:
|All times are GMT -5. The time now is 09:24 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.