Failed HVAC fan part 3. The saga continues...
OK, I found the fan resistor pack and when I removed it, it was filled with furry debris (think clothes dryer filter). Removed the first clump and the fan came on. I blew out the rest of the junk and reinstalled the pack. OK great right ? An hour later, the fan was dead again. I took the pack out again and noticed that one end of the connector was melted. The connector still unplugs.
I want to use my ohm meter to check the pack. Does anyone know what the readings between the pins should be ? Also, the connector is garbage and I'm thinking of soldering the wires directly on the pack pins or using crimp push on terminals to connect the pack. Seems like a bad situation for a connector and wire insulation to melt.
Thanks in advance for any help. Jim (98 TJ Sport)
|All times are GMT -5. The time now is 06:23 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.