Jeep Wrangler Forum

Jeep Wrangler Forum (
-   General Jeep Discussion (
-   -   High beams are sticky (

drummerlc13 03-06-2013 07:08 AM

High beams are sticky
The high beam switch is VERY sticky. It turns on before the switch actually does. When i hit a bump, or even a turn signal it turns the high beams on. Also when they on it turns on the low & high beams at the same time.
Also my flashers don't work, not the caution blinkers, the high beam flashers, they just turn off my low beams if they're on; but i guess that could serve some good if i accidentally flash a cop he/she can't pull me over for 'failure to dim head lights'
Hope this info will help you help me. Thanks!

90DesertTanYJ 03-06-2013 01:08 PM

Fill out your profile, you are posting in the "general" forum. My YJ has a seperate dimmer switch mounted on the column with a rod that runs up from it that the wiper switch presses on when you move the multifunction lever. Any one of those things may be in a bind or out of alignment. Newer and older models have different methods.

Shark_13 03-06-2013 01:15 PM

Seems the multi function switch starts to go bad after a while....mine does a similar thing with high beams being finicky.
I may try to clean it internally, or buy new one.

All times are GMT -5. The time now is 12:32 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.