I recently installed a Teraflex 2.5" coil lift. After the install, I made sure to torque all control arm bolts to the correct ft lbs and the trackbars both front and back. After that I took it for a test drive and noticed that when i stop quickly (For example I am stopped and let my foot off the brake to get a slight roll and slam on my brake) I feel something shifting in the front end. I have been googling this issue for a couple hours now and have found no information. Any help would be greatly appreciated!
03-13-2013 08:36 AM
I would look at the upper shock bolts as they are a pita to install and may be rattling. Also, did you unbolt control arms to install the lift?
03-13-2013 01:15 PM
03-13-2013 02:16 PM
Did you re- torque everything while you jeep was on its own weight, off jack stands?