Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Will a 98 tj ax-15 fit 91 yj? (http://www.wranglerforum.com/f218/will-a-98-tj-ax-15-fit-91-yj-227195.html)

UF0S AND BBQ 03-12-2013 07:44 PM

Will a 98 tj ax-15 fit 91 yj?
 
Both motors are 4.0 one has external slave which is a upgrade, but my question is will it bolt right into my 91 4.0 engine and connect to my transfer case the same?

Also this is first post so forgive me if i misplaced post.


Thanks all

OverkillYJ 03-12-2013 07:52 PM

Yes, but I think you will need a different pilot bushing. About 90% sure they are a different size before 92. An nv3550 will also swap in and is slightly stronger.

UF0S AND BBQ 03-13-2013 06:24 PM

For the pilot bushing that can be pushed out with grease and the hammer trick correct? But the swap for the different pilot bushing should be a simple 5-10 minute swap if im not mistaken?

OverkillYJ 03-13-2013 07:48 PM

Quote:

Originally Posted by UF0S AND BBQ (Post 3499771)
For the pilot bushing that can be pushed out with grease and the hammer trick correct? But the swap for the different pilot bushing should be a simple 5-10 minute swap if im not mistaken?

Yeah, not even 5-10 minutes, more like 2. But a slide hammer works better, then you don't need to wipe out the grease which is why I say 2.

UF0S AND BBQ 03-14-2013 06:49 PM

Thank you I appreciate your input!


All times are GMT -5. The time now is 12:02 PM.