Jeep Wrangler Forum

Jeep Wrangler Forum (
-   Builders Corner (
-   -   4.0l build (

tjcrawler25 03-17-2013 07:55 PM

4.0l build
I'm thinking about building a 4.0l for my wrangler I didn't know what a good combo would be between the cam,intake,board size and crank. With the least machine work possible but will make a decent amount of torque and power.?? Any suggestions

AKYJ 03-20-2013 11:35 PM

Comp cam makes a torque 4x4 Cam, comes with Hydraulic Flat Tappet rockers too, 60 k miles and no problems. Diamond pistons also makes a kit for the 4 liter would highly recommend them to.
I don't remember the horsepower torque numbers but it's definitely a big difference.

tjcrawler25 03-21-2013 04:58 AM

OK how would I go about strokeing it. What would I need for a crank and rods?

IrateDonnie 03-21-2013 07:43 AM


Originally Posted by tjcrawler25 (Post 3532450)
OK how would I go about strokeing it. What would I need for a crank and rods?

You would need to get bigger fuel injectors for it too if you're considering a stroker. If you do a search there are some really good threads about building a stroker on the internet. It would be a little more expensive than a regular rebuild though.

goyette09 03-26-2013 12:58 AM

I just bought a different jeep, I have been looking into the stroker kits and found this. Pro Rock stroker kits Jeep 4.0-4.6 -4.7- 5.0 - 505performance

All times are GMT -5. The time now is 06:27 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.