Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   CJ General Discussion Forum (http://www.wranglerforum.com/f298/)
-   -   '71 CJ parts (http://www.wranglerforum.com/f298/71-cj-parts-228965.html)

YJ325i 03-19-2013 10:25 PM

'71 CJ parts
 
A customer of mine has a '71 CJ5 completely torn apart at his garage...tub off, axles off, etc. It has a factory 4 cyl. prob 3 spd. He wants to sell it all. I have a '95 YJ, don't think there is much I could use. But anything I could look for that would be of value??

duffer 03-21-2013 11:52 AM

I believe that should have the 30 spline, flanged, D44 off-set rear axle which is the most desirable of the factory axles for use with a D18 transfer case. Transmission behind the F head is probably the T90, rather than the more desirable T14 and of limited value. A lot of the pieces will have value to the people restoring the older CJ 5/6's.

I would join and place a classified add at:

Early CJ5.net > Forums

hooper 03-21-2013 09:03 PM

Some of those transfer case had saturn or warn overdrive. They sell for good money.

duffer 03-22-2013 10:14 PM

Quote:

Originally Posted by hooper (Post 3535728)
Some of those transfer case had saturn or warn overdrive. They sell for good money.

A 71 should still be running the D18 so yes, there could be an overdrive but that should be more than obvious. However, not that common to find those. Same for finding a PowrLoc in either axle. Those, at least IMO, are still the best of the limited slips.

YJ325i 03-23-2013 10:09 PM

Turns out , he has the v6. Since its a 71 should be the the buick 225. Does that change anything? The frt axles have trunions. The tub and frame are pretty rough. Anyone every get that motor to fit in a YJ..lol


All times are GMT -5. The time now is 08:42 PM.