Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   started my 8.8 swap (http://www.wranglerforum.com/f218/started-my-8-8-swap-230079.html)

TRM627 03-24-2013 08:20 PM

started my 8.8 swap
 
okay so today i picked up my 8.8 for 125 from the yard!

i plan to completely redo axle, i bought calipers rotors and pads

i found this swap kit i plan on using what yall think? kNOw Where 2Jeep Complete Ford 8.8 Install Kit For '91-'95 Wrangler YJ

what seals and bearings should i replace?

also i have 4.88 gearing in front so i plan to do that in the rear and also i want a locker, dont want to spend to much but want good quality what should i do here? (does the brand of gear have to be the same as gears in the front?) and also should i lock the front d30?

and i have the 2.5 with ax5 so which adapter do i need and what is the best place to get the drive shaft?

i plan to do soa so i know the rear i just use the brackets in the kit and put on top but what do i need to do it in the front?

what else am i missing thanks


All times are GMT -5. The time now is 12:38 PM.