I should be picking up my 2013 wrangler this week and want to put in HID's right away. Is there a place that I can go to have them installed that is honest and reputable? Also, for anyone with HID's, what setup did you go with and what will give me the look and performance of stock HID's? I know that there's a huge thread on this, but there is a lot of info and some of it is conflicting. Thanks
03-27-2013 11:26 AM
Hey man I have a 2012. For your headlights u need to get h13 bulbs. Spend the extra 20 $ and get the high beam too or ur going to have to cut wires and it's not fun. I got 55 watt with a color of 6000k it looks great. You will also need to purchase a relay and resistor wiring harness. You can get it at any car audio store or online. I got my stuff from DDm tuning. Then your fogs are the tricky part. They do not make a bulb for the fogs. And the housing is plastic. If you want fog hids you need to get the delta fog light set up. It is 320$ but it comes with metal shock proof and water proof housings with the ballests and a switch and a relay harness. If you do decide to get them I can tell you how to wire it up because the directions are not very good.