Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Classifieds Archive (http://www.wranglerforum.com/f135/)
-   -   Powertrax No-Slip for D35 with LSD (http://www.wranglerforum.com/f135/powertrax-no-slip-for-d35-with-lsd-230726.html)

DjA 03-27-2013 10:37 AM

Powertrax No-Slip for D35 with LSD
 
WTB a Powertrax No-Slip locker for 99 TJ w/ Dana 35 and Limited Slip Diff. Part # is 92-0435-2725.

Its a long shot, but does anyone have one of these lying around?

idiot magnet 03-28-2013 07:50 AM

Have you checked into this thoroughly?
From looking at a D35 LSD carrier I don't think you can fit this in there. I believe you need the standard D35 carrier and then you install the 92-0435-2725 locker into that which will give you the locker and LSD features that it lists in it's features.
Send an email to powertrax to verify this.

DjA 03-28-2013 01:36 PM

Quote:

Originally Posted by idiot magnet (Post 3562977)
Have you checked into this thoroughly?
From looking at a D35 LSD carrier I don't think you can fit this in there. I believe you need the standard D35 carrier and then you install the 92-0435-2725 locker into that which will give you the locker and LSD features that it lists in it's features.
Send an email to powertrax to verify this.

I've already consulted extensively with Stan from Jeeperformance, who will be doing the installation, and we agree this is the part. The TJ I have already has an LSD, so most lunchbox lockers will not fit. This particular one allows you to add a locker to a diff that already has LSD.

Richmond, who makes Powertrax, was apparently sold, so its hard to get answers and find the actual part itself. Their website has an application guide that states that this part is what goes in a D35 with LSD. See link below.

http://www.richmondgear.com/powertrax/jeep1ns.pdf

idiot magnet 03-28-2013 01:42 PM

That is a different set up, but sounds like it would be ideal for what you are doing with it. I know the carriers have a much different opening for the LSD units, that's why I asked.
I did a part search and found several sites that still carry them, but they are pricey.

GLWS

DjA 03-28-2013 04:10 PM

Quote:

Originally Posted by idiot magnet (Post 3564128)
That is a different set up, but sounds like it would be ideal for what you are doing with it. I know the carriers have a much different opening for the LSD units, that's why I asked.
I did a part search and found several sites that still carry them, but they are pricey.

GLWS


What is a different set up?

We haven't found a place that has them in stock right now - some sold out, some on back order. JEGS says not until late June. So I'm trying to see if someone has one sitting on a shelf right now.

idiot magnet 03-28-2013 04:37 PM

That's the first one I've seen that will fit inside the LSD carrier.
I searched just that part number and saw several companies selling them, but didn't check to see if they were in stock. Most lockers don't use a LSD carrier is all I was saying.


All times are GMT -5. The time now is 09:03 AM.