I am new to the gang. I hope noone is offended because I have a Samurai body, but a Jeep power train. It is a mean looking ride with a set of 33's on it. I put a 94 2.5l in it. And the 94 axles under it. Ok so here is my problem. I have everything hooked up but I am not getting any spark to the plugs. I have all new distr. parts and a new coil, new sensors. If anyone can give me some advice on what it could be I would be grateful. Also the check engine light comes on with the key and goes off like normal, the fuel pump comes on till it primes like normal. Thanks
03-29-2013 11:06 AM
Would a troubleshooting computer rental from autozone tell me the problem?
03-29-2013 08:05 PM
If u have a computer with a code in it it will. Otherwise. U must check the wiring etc for spark. And start from the dist etc.
03-30-2013 01:10 PM
Ok I will give it a look see. Does anyone know how many grounds on the wiring it has?