Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Running 35's (http://www.wranglerforum.com/f282/running-35s-231333.html)

khall7 03-29-2013 09:11 PM

Running 35's
 
Anyone running 35's on stock se axles with 4.10? I've been advised against it but some people say its fine...Has anyone done it

TFBlackout05 03-29-2013 10:20 PM

Ive ran my 35s on stock 3.27's? for about a year just upgraded to 4.88's. Should of done it a long time ago! I would not advise doing heavy off roading with stock gears. But mines a weekend mudder I knew I could get away with it till I got the money saved up! defiantly a good investment! Good luck!

Big Cole 03-30-2013 06:46 AM

Quote:

Originally Posted by khall7 (Post 3569991)
Anyone running 35's on stock se axles with 4.10? I've been advised against it but some people say its fine...Has anyone done it

The general consensus is 35s with stock gears and the 4 cylinder will perform poorly. Look into installing a new rear axle (D44 or 8.8) and regearing front and rear to 4.88. You should also consider upgraded D30 axle shafts.

Johnnybonkel 03-30-2013 07:21 AM

Ok..

khall7 03-30-2013 01:34 PM

Quote:

Originally Posted by Big Cole (Post 3571091)
The general consensus is 35s with stock gears and the 4 cylinder will perform poorly. Look into installing a new rear axle (D44 or 8.8) and regearing front and rear to 4.88. You should also consider upgraded D30 axle shafts.

how much would all that cost? Parts not labor have a friend who's a mechanic who hooks me up on labor costs

khall7 03-30-2013 01:35 PM

Quote:

Originally Posted by Johnnybonkel (Post 3571152)
Ok..

...ok...

Plumber1 03-30-2013 05:40 PM

Wow my 4 banger sucked on 33's w/4:10 gears I had to move up to 4:88's, IMO 4:88's is not enough for 35's w/ 4 cyl


All times are GMT -5. The time now is 01:51 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.