Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Off Road and External Lighting (http://www.wranglerforum.com/f132/)
-   -   Help with a 50" e series rigid light bar. (http://www.wranglerforum.com/f132/help-with-a-50-e-series-rigid-light-bar-231624.html)

Brock halper 03-31-2013 10:06 AM

Help with a 50" e series rigid light bar.
 
I have a 30" bar and 4 dually d2s all of them have just one wire going to the light that plugs into the wiring harness. I got my 50" e series in and it has a pos wire on one end and a neg wire on the other. Are all the 50" bars wired this way or should it be just one wire running to it any help is greatly appreciated.

RubiCobra 04-30-2013 05:38 PM

The D2's have a ground wire, you just can't see it. From the quick disconnect to the light they have a rubberized coating over the pos and ground wires.

Electrical accesories will always have a ground. The big light bars just don't have the quick disconnects like the duallys


All times are GMT -5. The time now is 08:44 PM.