Flag Pole Build Thread
Okay so I've been saying for awhile I was going to make a flag pole set up for my Jeep and I finally Jumped on it.
Small 4" Zip-ties x8
3'x5' Flags x2
Small hose clamps x4
48" Ceiling Fan Extension Downrod x2
Large truck bearings x2
Metal couplets x2
Smaller downrod extensions x2
Primer, Paint, Clear-coat
and some misc nuts and bolts
Weld down the couplets to any metal bumper, ect, for downrods to screw into.
Drill holes in the bearing to bolt onto smaller downrod and bolt smaller downrod to larger one as a topper
Repaint over the welds and wa-la.. The wind was perfect haha :thumb: mostly good for parades but it still is awesome, and easily removable.
As always I ask to see your guy's set-ups so post pictures if you have a flag set-up :)
Almost forgot.. The zip-ties go through the hose clamp and onto the flag.. This is cause the grommets on the flag were to small for the right size hose clamps.
That's badass nice job
That looks pretty cool. Wish I had a welder....
Not mine but its good to know people with them haha
|All times are GMT -5. The time now is 01:45 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.