Does anyone know the size of the 6 bolts on the cross member that holds the T case and tranny in place? I need the size of the head the size of the thread and inches per inch or mm and the length. I'm dropping it 1 inch and need to pick up bolts for it.
Thanks for any help.:banghead:
04-08-2013 04:14 PM
If you are talking about the six bolts that go into the frame the holds the skid plate (that holds the transfer case etc in) they are I believe 12mm x 1.75. Take one to the hardware store and matchup, they ususuall have a thread gauge hanging there or grab nut that will go on and go from there on length once you find the right thread.
04-09-2013 12:21 PM
They are 1/2 X 13 X 2" in length on mine. Thanks for thehelp