Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Communications and Electronics (http://www.wranglerforum.com/f40/)
-   -   Installing Cobra 75 (http://www.wranglerforum.com/f40/installing-cobra-75-a-234447.html)

Four Wheel Archer 04-10-2013 06:53 PM

Installing Cobra 75
 
I purchased a Cobra 75 and I would like to know if anyone has installed one of these in 2012 or 2013 JK. I am not sure where to put the small box. If you have pictures that would be great.

Thanks!

commodore_dude 04-10-2013 09:31 PM

Just curious, is there space behind the glove box door? That's where I mounted it on my LJ, just zip tied it to a bundle of wires to keep it out of the way...

Four Wheel Archer 04-12-2013 10:35 PM

thats a good idea. I will have to check.

Jeep4l 04-22-2013 08:24 PM

I also put it behind the glove box, to make it easy to connect/disconnect the cable to check the SWR and add a speaker

:wavey:

http://imageshack.us/a/img407/3530/imag0254bis.jpg

termite 04-23-2013 09:46 AM

I mounted mine to the tub, just forward of the inboard passenger seat rail. It is out of the way and I have quick and easy access to the connector for the hand set.

I did not have anywhere convenient behind the glove box, it was all climate control junk.

JackedUpMedic 04-23-2013 10:39 AM

Actually saw this yesterday as I'm planning on something like this in the future. Hope it helps.

http://youtu.be/oajh4Cd3_oY

xjrguy 04-25-2013 08:52 PM

Quote:

Originally Posted by commodore_dude (Post 3621545)
Just curious, is there space behind the glove box door? That's where I mounted it on my LJ, just zip tied it to a bundle of wires to keep it out of the way...

That's what I did when I installed this cb in my 2012.

Made it easy to access for swr tuning and connections.


All times are GMT -5. The time now is 02:40 PM.