Sye what front cv drive will work for rear?
I'm doing a sye hack n tap on my 97 TJ- NP231 TC (I think). I want to know which CV (front or not) DS will work in replacement for the rear. I'm willing to have one cut and balanced to make it work but a stock one from another vehicle would be awesome. I think only the u joint size matters but I can't find a parts list of CV Driveshafts with the correct size U joins. Can anyone help me out? I'm tryin to keep this sye under $200 in total. Thank fellas!
I don't think any will work without being shortened. But many people use the front shaft out of a cherokee. It has 1310 u-joints and the slip in the shaft.
Late 80's XJ front driveshaft
(beware the constant velocity front shafts-you don't want these)
Early 80's full size Wagoneers
Early 80's full size J trucks
90's Ford Explorer's
|All times are GMT -5. The time now is 03:46 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.