5.5 Conversion help!
I am looking for anyone that has, or knows, what the correct wheel backspace is for the following setup for my TJ Rubicon:
Reid outer knuckles
5 on 5.5 locking hub conversion
I plan to run a 285/70R17 tire, which translates to roughly a 33x11.50. Based on what I have been able to figure out, assuming this setup pushes the track width out 3/4", I will need a 4.25" to 4.5" backspacing. Does this sound correct?
|All times are GMT -5. The time now is 09:53 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.