Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   trouble getting screw out (http://www.wranglerforum.com/f210/trouble-getting-screw-out-237789.html)

khall7 04-25-2013 07:27 PM

trouble getting screw out
 
unfortunately I stripped the screw that holds the back seat belt buckles down trying to get it out do I could put it back in so people can wear seat belts in the back seat. Idk why the previous owner took it out. But anyway that's my delimma any advice on how to get that screw out and where I could find a new one that isn't stripped to put back in

bc3_Jeep 04-25-2013 08:01 PM

Get one of these....... you will thank me every time you use it.....

Sears.com

Mine has NEVER failed to get a stubborn ANYTHING out...... and I have worn out a couple....

MosesTJ 04-25-2013 08:29 PM

It's also good for some brake rotors...works great!

khall7 04-25-2013 10:33 PM

Quote:

Originally Posted by MosesTJ (Post 3683072)
It's also good for some brake rotors...works great!

cool thanks

yoopone 04-26-2013 07:48 AM

Quote:

Originally Posted by bc3_Jeep (Post 3682943)
Get one of these....... you will thank me every time you use it.....

Sears.com

Mine has NEVER failed to get a stubborn ANYTHING out...... and I have worn out a couple....

Ditto. I have the same one. Works terrific on all the hinge bolts also. All my pneumatic impact ever did was strip the heads out.

RubiCobra 04-26-2013 01:04 PM

The screw you're looking for is Chrysler P/N 06036295AA

Or you could go to Home Depot and replace it with a hex head screw.


All times are GMT -5. The time now is 05:04 PM.