Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Rear Bumper (http://www.wranglerforum.com/f282/rear-bumper-237979.html)

justinzeppelin 04-26-2013 07:34 PM

Rear Bumper
 
So i bought a 2nd hand bumper off wrangler forums. It did not come with any bolts..
I removed my stock bumper and it seems as though the bolts on the stock bumper were welded on, either that, or they have rusted pretty badly.

Wanted to get some new bolts from online, does anyone know the right size to get if i need to replace it? I understand that bolts have grades? Can i just buy them off from any hardware store or do i have to get a specific type?

Thanks in advance guys

apaTJ 04-26-2013 08:04 PM

Just buy some at a hardware store. Get grade 8 if you can or stainless steel. I replaced my factory ones with some hex heads cus I don't like the star bits. I believe it's 1/2 in regular thread very common. Itl have a 3/4 in hex head. Take one of your stock bolts for comparison.

ob269 04-26-2013 08:13 PM

Quote:

Originally Posted by apaTJ (Post 3687483)
Just buy some at a hardware store. Get grade 8 if you can or stainless steel. I replaced my factory ones with some hex heads cus I don't like the star bits. I believe it's 1/2 in regular thread very common. Itl have a 3/4 in hex head. Take one of your stock bolts for comparison.

This.. Go to hardware store and find 1/2 bolts, about 1.5 inch long..

my996duc1 04-26-2013 10:48 PM

1/2" x 13 grade 8 bolt.
3/4" hex head - 1.5" long.

What I used for my bumper this last week.

_


All times are GMT -5. The time now is 06:01 AM.