Cold air intakes Airaid or Volant
Well I am in a bit of a pickle as I am waffling back and forth on which make of cold air intake I would like to buy for my 2013 JK. Currently I was looking at the Volant 17636 Cold air intake system and really like it as it has an inclosed box. However now I have found the Airaid MXP series cold air intake No. 311-132 and this comes with a lifetime warranty.
My question is anyone have any experiences with either of these intakes? I really don't think there are huge differences but thought I would run it past the forum community before I shell out the cash.
I have a Gibson split exhaust to pair with the intake so I need to make my JK breathe.
Any help would be greatly appreciated.
First of all, the OEM air flow is as good as it will get. Don't buy an intake thinking you're letting the Jeep breathe. The only thing you will get is a nice noticeable growl/roar.
I wanted to spice up the overly quiet Pentastar, so I bought the Airaid synthamax version that you're considering. Here are the most important points you need to know:
- For the Airaid, the stock airbox's cold-air funnel must be cut and installed onto the airaid. This means that, in the event of warranty work, this install is NOT reversible.
--You can just install the airaid with no air funnel and I doubt it does anything anyways. In that case you won't need to cut the stock airbox.
- For the Airaid, the temp sensor mounting is questionable. I don't like it. Doesn't seem reliable. I've seen worse though: afe's. Still, research the method that the Volant uses and weigh that into the choice.
- The airbox containing the filter makes a BIG difference in sound. An intake with a box is much quieter than an intake without a box. On the plus side, these boxes seem to get rid of some annoying resonance. After experiencing the AFE no-box intake on my wife's JK, I opened the box on my airaid (by unscrewing/removing the fancy metal plate on the top) to make it louder. Big difference in sound, but also introduction of some annoying resonance sounds.
- The amount of parts and steps in the airaid install is ridiculous when compared to what I experienced in an AFE install. It's like airaid just threw a bunch of universal parts in a box and called it a JK intake. They didn't do any production on it at all besides the actual main tube.
I wish I knew about the Volant so I could help you more but, in the end, all of the intakes are pretty similar. Its the temp sensor mounting, box vs. no box, and possible stock intake modifications that are the most important differences.
Thanks for the info!!!! I do not want to alter anything and just simply want to bolt on the new intake. I think Volant may be the way to go.
|All times are GMT -5. The time now is 03:55 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.