Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Suggestions for a 3-4 inch lift for 2012 JK (http://www.wranglerforum.com/f274/suggestions-for-a-3-4-inch-lift-for-2012-jk-238175.html)

MattCap 04-27-2013 09:13 PM

Suggestions for a 3-4 inch lift for 2012 JK
 
Best brand? Best prices?

JTPhoto JK 04-27-2013 09:20 PM

For best results, less headaches and a decent price stay under 3".

What size tires do you wish to run?

What will you be doing with your Jeep and how much wheeling do you intend to do?

TeraFlex
Rock Krawler.

nocibur2 04-27-2013 09:21 PM

I chose to go with the BDS 3" suspension lift for my '13 Rubicon. I went with the basic kit with the standard BDS shocks. I like their "no questions asked" warranty. Time will tell!

:cool:

jsmithtx 04-27-2013 10:46 PM

Anything over 2.5" will require drive shaft replacement on the front end.

MattCap 04-28-2013 07:33 PM

How much does changing out the drive shaft run? I think I'm gonna how with the BDS 3" lift with 33/34 inch tires

HK_Runner 04-28-2013 07:37 PM

$300-$400 for the driveshaft. All you need is a 2" lift...even just a budget boost for 33/34 tires.

Muddr1 04-28-2013 08:10 PM

I just installed the rancho 3'' sport lift. If you buy the lift and 4 shocks, which you will need anyway, you get a 300 doller rebate.
Just got done with the install yesterday. The lift with 4 9000XL shocks were around 900 bucks through amazon.

TexasJeepGirl 04-28-2013 08:12 PM

Running Zone 4" on 35's with STOCK driveshafts and zero issues. Love it so far.

MattCap 04-28-2013 08:14 PM

How is that affecting you mpg and acceleration?

TexasJeepGirl 04-28-2013 08:15 PM

No matter what size lift/tires you go with, anything bigger than stock will negatively affect your fuel economy. Gearing choices will also tweak your fuel economy as well.

Muddr1 04-28-2013 08:29 PM

Just got the lift in yesterday, tires and wheels going on this week, long ride next weekend, I will let you know then. Before I did all the work, I was getting 19-20. So I am anxious to see what I will be down to.


All times are GMT -5. The time now is 10:40 PM.