Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   AEV leveling kit to Synergy lift (http://www.wranglerforum.com/f274/aev-leveling-kit-to-synergy-lift-238335.html)

roxbury29 04-28-2013 03:43 PM

AEV leveling kit to Synergy lift
 
1 Attachment(s)
Hello, just curious on your thoughts.
should I leave it alone, or change the rear springs too ??

had the AEV leveling kit, and I just installed
Bilstein5100 all the way around,
and Synergy (2-3") progressive springs in the front. ( removed all leveling kit shock brackets ) these springs got me right at 3" list in the front

from Fenders to ground ( center of wheel )
Front is 40"
Rear is 38"

I was considering getting the next size lower Synergy spring for the back ( 1-2" )
which will likely get me 1.5-2" in the back ( leaving the rear aev spacer on top of these springs )

jadmt 04-28-2013 04:50 PM

looks pretty level to my eye.

SilverSport 04-28-2013 06:52 PM

^x2.

4DoorCrush 04-28-2013 07:57 PM

You can't measure your fenders because the front sits higher! measure your pinch seam

roxbury29 04-28-2013 09:27 PM

Quote:

Originally Posted by 4DoorCrush (Post 3693603)
You can't measure your fenders because the front sits higher! measure your pinch seam

^ I will measure that, thanks.
I have a friend who has a Teraflex leveling kit with rubi-shocks and springs. didn't take a picture, but measured his at my house;
same way
Fenders(center) to ground
it looks good, and was 39" front, and 39" rear

kjeeper10 04-29-2013 05:14 AM

That's right on. That spring list 2" four door and 3" 2 door.

Without weight +1" or so.

For 3.5" synergy recommended 4's and 3's. this is with a lighter rig.

roxbury29 04-29-2013 11:49 AM

Hello, I measured the Pinch seams.

Sitting just over 1" higher in the Front.
This is with my Hardtop OFF , it might be 1.25-1.40" lower in the back after I put the hardtop back on.

I may leave it alone, get a softop for summer months. :)
or get the Synergy (1-2") springs and try it first with the rear AEV spacer,and if it sits too high in the back I can replace it with the OEM isolator.

4DoorCrush 04-29-2013 12:32 PM

Quote:

Originally Posted by roxbury29 (Post 3696168)
Hello, I measured the Pinch seams.

Sitting just over 1" higher in the Front.
This is with my Hardtop OFF , it might be 1.25-1.40" lower in the back after I put the hardtop back on.

I may leave it alone, get a softop for summer months. :)
or get the Synergy (1-2") springs and try it first with the rear AEV spacer,and if it sits too high in the back I can replace it with the OEM isolator.

yeah you might should do something in the rear

roxbury29 05-19-2013 08:31 PM

1 Attachment(s)
Update - completed Synergy Lift ( front & rear )
Rides GREAT! . done for now :)

maybe..


All times are GMT -5. The time now is 07:41 PM.