Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Need high quality rear DS (http://www.wranglerforum.com/f282/need-high-quality-rear-ds-238479.html)

Hamster 04-28-2013 11:34 PM

Need high quality rear DS
 
My '98 TJ has a SYE and I need a top quality double cardan cv rear driveshaft that is HIGH speed balanced. Anyone recommend a high quality driveshaft company?

Dougzin 04-28-2013 11:36 PM

Tom Woods. IMO there's no better. :)

Hamster 04-28-2013 11:41 PM

I have a tom woods already that's out of balance. It's out of any warranty and would rather get a whole new DS from a top shaft builder that can high speed balance it.

McChillen 04-28-2013 11:44 PM

Go to a drive shaft shop and have them balance it?

Hamster 04-28-2013 11:48 PM

Talked to a couple ds shops they only balance it about 1500-2000 rpm. I need a 3000 rpm balance. I'm also changing the rear axle yoke from 1330 to 1310 so the DS yoke would need to be rewelded. So I might as well get a new high quality DS and start from scratch.

Hamster 04-30-2013 07:19 AM

Another board mentioned Tattons out of Utah. Anyone have experience with his driveshafts?


All times are GMT -5. The time now is 11:53 AM.