2013 JKU Premium Top Removal
Okay, so I know this is a newb question, but I took the top off this past weekend, and no matter how much I folded and velcrod it just didn't seem right. I drove around and it seemed okay though.
So here's my point. The only place I could find for the velcro was a hole in the body closest to the rear doors (a round hole, not an oval one I would expect), and I wrapped that around the part where the rods bend. It just didn't seem like that was the right place, but I couldn't find anywhere else? Also, the top fabric was folding down into the rear of the tub, quite the opposite of the sunrider position.
Does anyone have pictures of their '13 premium top folded back and the velcro holding it?
|All times are GMT -5. The time now is 12:12 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.