Jeep Wrangler Forum

Jeep Wrangler Forum (
-   Communications and Electronics (
-   -   Speaker Pod Install (

rockytj 04-30-2013 08:12 PM

Speaker Pod Install
I picked up a set of 03-06 speaker pods to put in my 97 wrangler. I have a couple of questions. First, i know i am going to have to drill a hole in the roll bar for the stud. Does anyone know what size i need to make the hole? Second, what is the best way to locate where the hole goes? Thanks.

TheTJRod 05-02-2013 08:31 AM

Really you can use any size bolt you want as long as it passes through the hole in the speaker pod and the shoulder of the bolt is wide enough to keep it in place or use a washer. I would clamp the speaker pod to the rollbar where you want it. Having a buddy hold it in place would work too. Then mark and drill/tap.

All times are GMT -5. The time now is 07:02 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.