Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   sorry if this is the wrong place for this question (http://www.wranglerforum.com/f282/sorry-if-this-is-the-wrong-place-for-this-question-239561.html)

RollTideTJer 05-01-2013 06:53 PM

sorry if this is the wrong place for this question
 
This might be a dumb question so I apologize in advance. I found the bumper I want ( I think it is a "stubby" rampage recovery bumper) I was wondering if that is compatible with all winches. As I am kinda on a budget now I was looking primarily at smittybuilt and superwinch. Any help or comments are appreciated. Thanks.

JohnDoe 05-01-2013 08:38 PM

As long as you have a winch plate it should be

jeepwayoflife 05-01-2013 09:14 PM

Most if not all electric full size vehicle winches use the same bolt pattern. Just check the mounting pattern for the winch and bumper to make sure. You may have to call the company or do a Google search if it isn't on their website.

RollTideTJer 05-01-2013 09:21 PM

Thanks. I figured as much but I'll try to look it up to make sure

XTRyan 05-02-2013 10:54 AM

Quote:

Originally Posted by RollTideTJer (Post 3707482)
This might be a dumb question so I apologize in advance. I found the bumper I want ( I think it is a "stubby" rampage recovery bumper) I was wondering if that is compatible with all winches. As I am kinda on a budget now I was looking primarily at smittybuilt and superwinch. Any help or comments are appreciated. Thanks.

As Jeepwayoflife said, most electric winches have a standard bolt pattern of 10" on 4.5". So, most aftermarket bumpers will come with that mounting pattern.

I know for a fact that Smittybilt and Superwinch have the standard bolt pattern. So either of those winches should work for your bumper.

If you have any questions, feel free to PM me. I'll be happy to help out.

-Zach


All times are GMT -5. The time now is 10:42 AM.