I have a 91 YJ with a 4 cyl engine which has develpoed frame issues. I am aware that there are frame repair sections availabel but since I am going to do a ground up restoration I am considering locationg a used frame in good condition and building from there. My question is, is there a difference between the fram used in the 4 cyl wranglers and the 6 cyl wranglers. I have found a couple of nice frames that state they are from 6 cyl vehicle.
05-08-2013 01:11 PM
Not for sure, should be close, only thing I can think of would be motor mounts, and other mounts for the TC and Transmission. Might check with local Jeep dealer or body shop. If you are doing a full restoration you might consider doing an engine swap for more power. It would be a lot easier doing it while you have easy access to everything.