Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Rampage recovery front bumper (http://www.wranglerforum.com/f274/rampage-recovery-front-bumper-241277.html)

Rvp523 05-08-2013 11:08 AM

Rampage recovery front bumper
 
looking to get the rampage recovery front bumper, anyone know if you can keep stock fog lights? and how easy is install?

jkmohican 05-08-2013 11:11 AM

Very easy to install, and the bumper holes are setup to take the factory lights. Took abut 30 mins.

Attachment 246657

Here's a shot of the fogs. They look better on the rampage than the stock bumper.

Dunkin_D 05-08-2013 11:12 AM

Factory fogs can be used. Very easy to install. Took my longer than 30min because I had trouble getting the plastic skid thing off but besides that it was very straightforward

Rvp523 05-08-2013 11:14 AM

that looks sweet!, i also have aftermarket KC Fogs, on top of my stock bumper. They are attached to a bar behind the grille i think those will be fine with the change in bumper.

jkmohican 05-08-2013 02:34 PM

Quote:

Originally Posted by Rvp523 (Post 3733249)
that looks sweet!, i also have aftermarket KC Fogs, on top of my stock bumper. They are attached to a bar behind the grille i think those will be fine with the change in bumper.

They will. I see a lot of people put them upside down, so the hinge for the lights will face the lights under the stinger, as opposed to above it like on your setup.

JeepHerz 05-08-2013 03:53 PM

All the info. you need and probably some you don't:
http://www.wranglerforum.com/f33/ram...-q-171132.html

Easy install. Keep the long plastic doo-ma-hickey to fill in the gap.
Technical details on the first couple pages of the thread. :D

wassup8687 05-08-2013 04:00 PM

Fit perfect. If I had to do it again I would install them prior to installing the bumper.

Jaker jk 05-08-2013 09:26 PM

Just put some dually's in the bumper
http://i257.photobucket.com/albums/h...psc773a1d2.jpg

KaraTheSahara 05-23-2013 11:43 PM

Quote:

Originally Posted by Jaker jk (Post 3735356)
Just put some dually's in the bumper
http://i257.photobucket.com/albums/h...psc773a1d2.jpg

Sorry, forum/jeep n00b here but I love the look of this. What is that additional bar that you have on the rampage? Is it a homemade gig? Great aesthetics if you ask me. Well done.

DCR-13JK 05-24-2013 05:27 AM

Did it by myself in about 45 minutes. It took that long cause it was a pain to get those floating bra to line up by myself but other than that easy peasy. Definitely install fogs befor u put the bumper on. I think it actually tells u that in the instructions.


All times are GMT -5. The time now is 03:47 AM.