Jeep Wrangler Forum

Jeep Wrangler Forum (
-   YJ Tech Forum (
-   -   Where is the stock ground wire for the radio? (

Grizzlycb 05-09-2013 04:12 AM

Where is the stock ground wire for the radio?
I got in my jeep today and started it up to go to work. Radio was working and pulled my ebrake and my radio cut off. I realized I blew a fuse I replaced it and it blew again. So I'm guessing I pulled my radio ground. Any clues? I know it's somewhere around my ebrake

Grizzlycb 05-09-2013 05:24 AM

I work 430pm to 430am its really hard to trace down when it's still dark out side when I get off to actually work any suggestions would be nice so I can just track it down before work

sevenservices 05-09-2013 08:40 AM

I would think pulling a ground wire would disconect the circuit, leaving an open circuit causing nothing on the radio but also no fuses to blow.

If your blowing a fuse, somewhere + is touching - causing a short.

Check for pinched + wires that could be touching ground (metal) somewhere.

All times are GMT -5. The time now is 09:54 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.